Preparing The Mounting Cut-Out - Siemens SIMATIC HMI IPC477C Comapct Operating Instructions

Compact Operating Instructions
1.7 Installing/Mounting
1.7.2

Preparing the mounting cut-out

The following illustration shows the dimensions for the mounting cut-out.
(1)
(2)
(3)
Figure 1-3
Note
Mounting dimensions can be read from the dimension overview or they can be transferred to
the cabinet from the mounting template supplied.
12
Drill hole for screw attachment
Pressure points for clamp
Setscrews
Drill holes for the screws and pressure points for the clamp screws
(4) Clamp
(5) R 120 in the seal area
Z
(6) Seal area
SIMATIC HMI IPC477C / HMI IPC477C PRO
Compact Operating Instructions, 10/2010, A5E02368072-02