Setting Up The Language Selection In Windows Embedded Standard 2009 - Siemens SIMATIC HMI IPC477C Comapct Operating Instructions

Compact Operating Instructions
1.9 Commissioning
As of now, the operating system automatically opens its user interface on completion of the
startup sequence.
Note
To prevent data loss, it is advisable to create an image of your system partition after initial
commissioning.
Switching off the device
When you work with Windows Embedded Standard, always shut down the PC with the
command Start > Shut Down.
Note
The Enhanced Write Filter should be enabled following the installation of Windows
Embedded Standard on a Compact Flash card or SSD.
1.9.3

Setting up the language selection in Windows Embedded Standard 2009

Windows Embedded Standard 2009 offers the option of selecting the menu and dialog
languages. You can select the German and English languages.
Setting up the language selection
Windows Embedded Standard 2009 is set up by default with English menu and dialog
language and US international keyboard layout. You can change the language in the Control
Panel by selecting:
Start > Settings > Control Panel >Regional and Language Options > Languages tab, Language used
in menus and dialogs field.
In addition to the menu and dialog language, select Regional and Language Options and set the
default to non-Unicode programs in the Advanced section.
24
SIMATIC HMI IPC477C / HMI IPC477C PRO
Compact Operating Instructions, 10/2010, A5E02368072-02