Setting The Panel Type; First Commissioning - Siemens SIMATIC HMI IPC477C Comapct Operating Instructions

Compact Operating Instructions
1.9 Commissioning
1.9.5

Setting the panel type

1.9.5.1

First commissioning

Initial commissioning
● The "SIMATIC PC Wizard" program is automatically started once during commissioning.
● The "SIMATIC PC Wizard" implements the specific settings for the SIMATIC Panel PC
● Several dialogs appear on screen during initial commissioning of the SIMATIC Panel PC.
Procedure
Device-specific drivers are set during the hardware detection and configuration phase.
The type of SIMATIC PC is selected and detected automatically.
26
during the initial startup of the operating system.
NOTICE
Start the PC for commissioning in an unchanged delivery state and follow the dialogs
until their conclusion.
SIMATIC HMI IPC477C / HMI IPC477C PRO
Compact Operating Instructions, 10/2010, A5E02368072-02