Compact Operating Instructions
1.9 Commissioning
Steps for connecting the PE conductor
3. Connect the PE terminal (M4 thread)
1.9
Commissioning
1.9.1
Commissioning Information
Note
Initial commissioning of Windows Embedded Standard
System startup can take longer than usual for the initial commissioning. Only a blue screen
is displayed for several minutes.
NOTICE
Windows Embedded Standard: Observe EWF Information
A configurable write filter (Enhanced Write Filter) is available in Windows Embedded
Standard. Observe the EWF information in the operating instructions during activation and
use, since a data loss may otherwise occur.
Note
For information about the installation of the CompactFlash card with Windows Embedded
Standard operating system, refer to the operating instructions.
22
on the device to the PE conductor on the
cabinet or system in which the PC will be
installed. The minimum conductor cross-
section may not be less than 5 mm
①
.
2
SIMATIC HMI IPC477C / HMI IPC477C PRO
Compact Operating Instructions, 10/2010, A5E02368072-02