BBQ GSF2616AC Owner's Manual page 10

Step 6
a) Place the body assembly (A) on the cart
assembly.
b) Align the holes on front legs with the holes on
the body assembly(A), then insert one bolt
(AA), one spring washer (CC) and one flat
washer (DD) into each hole. T
until secure.
c) Align the hole on each back leg with the holes
on body assembly. Insert one bolt (AA), one
spring washer (CC) and one flat washer (DD)
into each hole. T ighten by hand until secure.
d) Go back and tighten all bolts using the
screwdriver provided.
Step 8
a) Align the two holes on right side of body
assembly with the two holes on the right side
shelf. Then insert one bolt (BB), one spring
washer (CC) and one flat washer (DD) into each
hole. T ighten by hand until secure.
b) Repeat the procedure for the left side of the body
assembly.
c) Go back tighten all bolts using the screwdriver
provided.
GSF2616AC
Owner's Manual
ighten by hand
Step 7
a) Loosen the four pre-installed bolts on the
side of control panel and left back leg, and
allow 1/4 bolt's length to extend, align the
holes on the left side shelf (G) with the
extended bolts, then push down on the left
side shelf until it clocks into place, tighten by
hand until secure.
b) Repeat the procedure for the right side shelf
(H) assembly.
c) Go back and tighten all the bolts using the
screwdriver provided.
9