Switching The Door Unlock Function - Lexus GS450h Owner's Manual

Hide thumbs Also See for GS450h:
Table of Contents

Advertisement

128
3-2. Opening, closing and locking the doors and trunk

Switching the door unlock function

It is possible to set which doors the entry function unlocks using the wireless remote
control.
Turn the power switch off.
1
When the indicator light on the key surface is not on, press and hold
2
or
for approximately 5 seconds while pressing and holding
The setting changes each time an operation is performed, as shown below. (When
changing the setting continuously, release the buttons, wait for at least 5 seconds,
and repeat step
Multi-information
display
To prevent unintended triggering of the alarm, unlock the doors using the wireless
remote control and open and close a door once after the settings have been
changed. (If a door is not opened within 60 seconds after
doors will be locked again and the alarm will automatically be set.)
In case that the alarm is triggered, immediately stop the alarm. (P. 83)
GS450h_OM_OM30E26U_(U)
.)
2
Unlocking function
Holding the driver' s door han-
dle unlocks only the driver' s
door.
Holding a passenger' s door
handle unlocks all the doors.
Holding a door handle unlocks
all the doors.
,
.
Beep
Exterior: Beeps 3 times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once
is pressed, the

Advertisement

Table of Contents
loading

Table of Contents