462
6-3. Do-it-yourself maintenance
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Turn the power switch off.
1
After a system failure, see "Fuse layout and amperage ratings" for
2
details about which fuse to check. (P. 466)
Open the fuse box cover.
3
Engine compartment
Remove the engine compart-
ment cover (P. 430) and
remove all of the clips.
Push the tabs on either side to
detach the lock and lift the lid off
while pulling the lock plate.
When installing the lid, check that
the lock plate and the tabs on either
side are connected correctly.
GS450h_OM_OM30E26U_(U)