Changing The Door Unlock Function Setting - Lexus LX 570 2016 Service Manual

120
3-2. Opening, closing and locking the doors

Changing the door unlock function setting

■
It is possible to set which doors the entry function unlocks using the wireless remote con-
trol.
Turn the engine switch off.
1
When the indicator light on the key surface is not on, press and hold
2
approximately 5 seconds while pressing and holding
The setting changes each time an operation is performed, as shown below. (When
changing the setting continuously, release the buttons, wait for at least 5 seconds, and
repeat step .)
2
Multi-information
display
To prevent unintended triggering of the alarm, unlock the doors using the wireless
remote control and open and close a door once after the settings have been changed. (If
a door is not opened within 60 seconds after
again and the alarm will automatically be set.)
In a case that the alarm is triggered, immediately stop the alarm. (P. 78)
LX570_OM_OM60N01U_(U)
Unlocking function
Holding the driver' s door handle
unlocks only the driver' s door.
Holding a passenger' s door han-
dle unlocks all the doors.
Holding a door handle unlocks
all the doors.
is pressed, the doors will be locked
for
.
Beep
Exterior: Beeps 3 times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once