The Blind Spot Monitor Function Detection Areas; Cautions Regarding The Use Of The System - Lexus GS450h Owner's Manual

The Blind Spot Monitor function
The Blind Spot Monitor function uses radar sensors to detect vehicles that
are traveling in an adjacent lane in the area that is not reflected in the out-
side rear view mirror (the blind spot), and advises the driver of the vehi-
cle' s existence via the outside rear view mirror indicator.

The Blind Spot Monitor function detection areas

The areas that vehicles can be detected in are outlined below.
The range of the detection area
extends to:
Approximately 11.5 ft. (3.5 m)
1
from the side of the vehicle
The first 1.6 ft. (0.5 m) from the side of
the vehicle is not in the detection area
Approximately 9.8 ft. (3 m) from
2
the rear bumper
Approximately 3.3 ft. (1 m) for-
3
ward of the rear bumper
CAUTION

Cautions regarding the use of the system

■
The driver is solely responsible for safe driving. Always drive safely, taking care to
observe your surroundings.
The Blind Spot Monitor function is a supplementary function which alerts the
driver that a vehicle is present in the blind spot. Do not overly rely on the Blind Spot
Monitor function. The function cannot judge if it is safe to change lanes, therefore
over reliance could cause an accident resulting in death or serious injury.
According to conditions, the system may not function correctly. Therefore the
driver' s own visual confirmation of safety is necessary.
GS450h_OM_OM30E26U_(U)
4-5. Using the driving support systems
305
4