B.1 Parallel Interface
B.1
Parallel Interface
B.1.1
Communication Modes
Note
The printer provides high-speed data transmission on a parallel interface. You can select the
parallel interface communication mode from the operation panel. To change communication
mode, see
Chapter 3 Using the Operator Panel, section 3.5.1 Changing Parallel Interface
Mode on page
3-34.
Use a parallel interface cable that complies with the IEEE 1284 standard.
You can choose from four communication modes:
Communication
Mode
Auto (default)
High-speed/ECP
Nibble
High-speed
High-speed
High-speed
Normal
Normal
Table B-1
Reception
Transmission
Nibble/ECP
Nibble
—
—
B-2