Kyocera Mita KM-P4845w Operation Manual page 44

CHAPTER 5 MANAGEMENT AND SETTING
11. Auto roll over
1 The selected item will flash. To enable auto roll change, press
the N or M key to select "ON".
Inch specifications
Metric specifications
Press the Enter key. The display will show "set ( value ) *" and
2
return to machine settings screen.
12. Buzzer
1 The selected item will flash. To enable the buzzer press the
N or M key to select "ON".
Inch specifications
Metric specifications
2 Press the Enter key. The display will show "set ( value ) *" and
return to machine settings screen.
13. Mgr. code change
1 The arrows will flash. Use the MNOP cursor keys to input
the pin code
Inch specifications
q Q r R
Metric specifications
q Q r R
2 Press the Enter key. The display will show "set ( value ) *" and
return to machine settings screen.
5-10