Kyocera Mita KM-P4845w Operation Manual page 41

Press the Enter key. The display will show "set ( value ) *" and
4
return to the step 1 screen.
5 Press the N or M key to select "End" ["back"].
6 Press the Enter key. The printer will return to the machine
settings screen.
4. Roll end
1
Press the N or M key to select a media type.
Inch specifications
Metric specifications
2 Press the Enter key.
3
The selected item will flash. Select whether the paper's
trailing edge is attached to the roll core by pressing the N or
M key to select "Fixed" or "Unfix" ["Unfixed"].
Inch specifications
Metric specifications
4 Press the Enter key. The display will show "set ( value ) *" and
return to the step 1 screen.
5 Press the N or M key to select "End" ["back"].
6 Press the Enter key. The printer will return to the machine
settings screen.
CHAPTER 5 MANAGEMENT AND SETTING
5. Auto shutoff
1 The selected item will flash. Press the N or M key to select
the desired auto shutoff mode.
Inch specifications
Metric specifications
Press the Enter key. The display will show "set ( value ) *" and
2
return to machine settings screen.
6. Timer set
NOTE
• If "5. Auto shutoff" is set to "OFF", the auto shutoff timer cannot be
set.
• When setting the auto energy saver time, do not set a longer time
than the auto shutoff time. When the auto energy saver time
exceeds the auto shutoff time, the auto shutoff function will engage
without the auto energy saver function having operated.
1 Press the N or M key to select the function for which the
timer is to be set.
Inch specifications
Metric specifications
2 Press the Enter key.
5-7