Kyocera Mita KM-P4845w Operation Manual page 12

PRECAUTIONS FOR USE
Other precautions
• DO NOT place heavy objects on the printer or cause
other damage to the printer.
• DO NOT open the front cover, turn off the main switch,
or pull out the power plug during printing.
• When lifting or moving the printer, contact your service
representative.
• Do not touch electrical parts, such as connectors or
printed circuit boards. They could be damaged by static
electricity.
• DO NOT attempt to perform any operations not
explained in this handbook.
• CAUTION : Use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
1-4
I Cautions when handling
consumables
CAUTION
• DO NOT attempt to incinerate the toner
containers or the waste toner tank. Dangerous
sparks may cause burns. .....................................
• Keep the toner containers and the waste toner
tank out of the reach of children. ..........................
• If toner happens to spill from the toner containers
or the waste toner tank, avoid inhalation and
ingestion, as well as contact with your eyes and
skin. ......................................................................
. If you do happen to inhale toner, move to a
place with fresh air and gargle thoroughly with a
large amount of water. If coughing develops,
contact a physician.
. If you do happen to ingest toner, rinse your
mouth out with water and drink 1 or 2 cups of
water to dilute the contents of your stomach. If
necessary, contact a physician.
. If you do happen to get toner in your eyes, flush
them thoroughly with water. If there is any
remaining tenderness, contact a physician.
. If toner does happen to get on your skin, wash
with soap and water.
• DO NOT attempt to force open or destroy the
toner containers or the waste toner tank. .............
Other precautions
• After use, ALWAYS dispose of the toner containers and
the waste toner tank in accordance with Federal, State
and Local rules and regulations.
• Store all consumables in a cool, dark location.
• If you will not be using the printer for a prolonged period
of time, remove all paper from the drawer(s) and the
multi-bypass tray and seal in its original packaging.