Kyocera Mita KM-P4845w Operation Manual page 43

8. Fusing temp.
1 Press the N or M key to select a media type.
Inch specifications
Metric specifications
Press the Enter key.
2
3
The selected item will flash. Press the N or M key to select
the fixing temperature for each media type.
> If "Plain" has been selected, select from 145 °C, 155 °C,
and 165 °C.
Inch specifications
Metric specifications
> If "Vellum" has been selected, select from 165 °C, 175 °C,
and 185 °C.
> If "Film" has been selected, select from 150 °C, 160 °C,
and 170 °C.
> If "Custom" has been selected, the temperature that has
been set for the custom media type will be displayed.
4 Press the Enter key. The display will show "set ( value ) *" and
return to the step 1 screen.
5
Press the N or M key to select "End" ["back"].
6 Press the Enter key. The printer will return to the machine
settings screen.
°
°
CHAPTER 5 MANAGEMENT AND SETTING
9. Custom paper.
1 The selected item will flash. Press the N or M key to select
a media type.
Inch specifications
Metric specifications
Press the Enter key. The display will show "set ( value ) *" and
2
return to machine settings screen.
10. Standard size
1 Press the N or M key to select the type of standard size.
For an inch specification printer, select "Architecture" or
"Engineer". For a metric specification printer, select "A sizes"
or "B sizes".
Inch specifications
Metric specifications
2 Press the Enter key. The display will show "set ( value ) *" and
return to machine settings screen.
5-9