Loading Media In The Multi-Purpose Tray - Kyocera FS-5900C User Manual

Loading Media in the Multi-purpose Tray

The multi-purpose (MP) tray serves as an additional tray for loading any type of media
that ranges in size from 91 mm
inches). Use it to load a single sheet or a stack of media, depending on the media's type
and thickness.
Use the multi-purpose tray to accomplish the following:
Print on standard and special media
• Standard media
Plain paper [75 to 165 g/m
• Special media
Label, transparency, card stock, coated paper, or the reverse side of printed paper
(The print quality may not be stable. Use the media tray for best reliability.)
Setting media thickness switch
Because the printer accommodates various media weights from the multi-purpose tray,
media thickness can be manually selected for the most reliable paper-picking. Follow
these steps:
1
Open the left side cover ( (1) ). The green media thickness switch is
located on the paper feeder and has three settings:
(1)
2 Move the switch to the desired setting.
Switch setting
Thin (Default)
Middle
Thick
3
Close the left side cover.
Selecting a multi-purpose tray mode
The multi-purpose tray has two different ways of feeding media: Cassette, and First
modes. For details on selecting a mode, refer to page 46.
254 mm to 216 mm
2 (20 to 44 lbs.)]
Thin
Middle
Laser paper 75 to 90 g/m
Laser paper 91 to 123 g/m
Transparency, Label, Coated paper
Laser paper 124 to 165 g/m
Setup
356 mm (3.6 10 to 8.5
Thick
Media
2 (20 to 24 lbs.)
2
(25 to 32 lbs.)
2
(33 to 44 lbs.)
14
19