Kyocera FS-5900C User Manual page 34

5 Insert the media with the printing side up into the multi-purpose
tray.
The height of media should not exceed the limit mark on the left guide, or it may
cause a media jam.
6
Adjust the media guides to the media size.
7
Use the printer driver to select the multi-purpose tray.
8
Open the printer driver's Paper tab, then pull down the Paper
Source menu and select your media type.
Note:
If you use the MP tray and print on the second side of the thick paper, select Card
Stock in the Paper Source menu, instead of Second Side.*
* Means the other side of a preprinted sheet.
Setup
21