Memory Card Error Codes - Kyocera FS-5900C User Manual

Memory Card Error Codes

Error codes 11, 13, 17, and 18 apply only to flash memory cards.
Error code
MEMORYCARD err 01
Press CONTINUE
MEMORYCARD err 02
Press CONTINUE
MEMORYCARD err 03
Press CONTINUE
MEMORYCARD err 04
Press CONTINUE
MEMORYCARD err 05
Press CONTINUE
MEMORYCARD err 06
Press CONTINUE
MEMORYCARD err 07
Press CONTINUE
MEMORYCARD err 09
Press CONTINUE
MEMORYCARD err 11
Press CONTINUE
MEMORYCARD err 13
Press CONTINUE
MEMORYCARD err 17
Press CONTINUE
MEMORYCARD err 18
Press CONTINUE
Using the Printer
Meaning
• You attempted to write more than 32 MB of data to a
memory card. Or, the capacity of the memory card
installed in the printer is more than 32 MB.
• A data name not existing on the memory card is
specified. Check the data names on the memory card.
• This memory card cannot be used by this printer.
The memory card is not a JEIDA card. Only JEIDA
Ver. 4.2 memory cards can be used by this printer.
The card is an S-RAM or flash card which cannot be
used by this printer.
There is no battery in the memory card. Replace the
battery in the memory card with a new one.
The memory card is write-protected. Cancel the write-
protection of the memory card.
The memory card requires formatting. Format the
memory card from the control panel (
The capacity of the memory card is insufficient. This
error code appears when an attempt is made to write
more data on the memory card than available memory.
To halt the writing of data, first stop data transmis-
sions from the computer, and then press the printer's
CANCEL key.
Press the FORM FEED key if the message
will appear in the message display. The message dis-
play will return to
Ready
The memory card is full of data. The number of data
which can be written on the memory card is limited to
127. Pressing the CANCEL key will restore the mes-
sage Ready in the message display.
This is a logical error. Try substituting another flash
memory card.
The flash memory card cannot be written due to
insufficient printer memory. Either delete unnecessary
macros and/or fonts stored in the printer, or expand the
printer's available memory.
This is a write error. Try substituting another flash
memory card.
P. 61).
Waiting
.
61