Kyocera FS-5900C User Manual page 107

Care and Maintenance
94
Error Message
I/F occupied
Imaging unit
not locked
Insert the same
MEMORY CARD
KPDL Error ##
Press CONTINUE
Left cover Open
Load (paper source)
(paper size)(media type)
Possible Cause
The front control panel
operation you attempted
is not possible because
that interface is receiving
data.
The imaging unit is not
locked properly because
its lever is not lifted.
A different memory card
was inserted following the
MEMORY CARD err/
Insert again message.
The printer encountered
an error during process-
ing data in KPDL mode.
The left side cover is open. Close it tightly.
The paper size or type
does not match the
printing area.
Corrective Action
Wait until the data transfer is
completed on that interface.
Lift the imaging unit lever
fully up.
Reinsert the same memory
card as was removed previous-
ly into the printer's memory
card slot.
Note the error code of ## and
press CONTINUE to clear the
error situation. See section
KPDL Error Codes ( P. 100)
for information.
One of MP tray, Cassette 1
to 3, will be displayed in
place of "paper source". Load
the paper displayed on the
message display and press the
CONTINUE key to print.
Or, pressing the FEED key
without pressing the CONTIN-
UE key, will cause Use al-
ternative? to be displayed,
and a different paper source
can be selected to supply
paper. The paper source
changes each time the FEED
key is pressed. And press the
MODE key to display Paper
handling>. Press the
and you can change the paper
source setting using the + or -
key to select. Load paper
appropriate for the paper
source and press the EXIT key
to print.
key