Kyocera FS-5900C User Manual page 109

Care and Maintenance
96
Error Message
Missing Toner
TD-81Y (Yellow)
Missing paper
feed unit
Option feeder
Left cover Open
Opt. ROM error
Press CONTINUE
Option interface
Error ##
Output tray
paper full
PJL OPMSG/STMSG
Paper jam
(Location)
Print overrun
Press CONTINUE
Processing
PAR FIT A4
Possible Cause
The yellow toner develop-
er is not installed in the
printer.
The paper feeder unit is
not installed in the
printer.
The paper feeder's left
side cover is open.
The printer has encoun-
tered an error while
accessing data in the
option EPROM (on the
printer main board).
The printer has detected
an error on the option
interface.
The output tray has
become full.
The printer encountered
an error during process-
ing PJL commands.
Paper has become
jammed.
The printer has received
print data that is too
complex to finish process-
ing in time with the
operation of the printer
mechanism.
Compressed data is
printed due to insufficient
memory when FIT flashes
in the resolution indica-
tor. The quality of printed
data is reduced when this
occurs. Fit will continue
flashing even after
printing is finished. The
resolution indicator will
automatically return to
the previous resolution
when any key is pressed,
when a timeout occurs, or
when subsequent data is
received.
Corrective Action
Install the yellow toner
developer ( P. 14).
Install the paper feeder unit.
Close it tightly.
Press CONTINUE to print the
data processed so far. Replace
the option EPROM.
Note the error code of ## and
consult your Kyocera dealer.
Remove paper from the output
tray.
Press CONTINUE to print the
page processed so far.
Remove jammed paper accord-
ing to section Removing Paper
Jam ( P. 71).
Press CONTINUE to print the
data. Install additional
memory .
Increase the printer memory
to avoid this error.