Kyocera FS-5900C User Manual page 111

Care and Maintenance
98
Error Message
RAM DISK error ##
Press CONTINUE
Read font ?
Failed
Read macro ?
Failed
Replace FK-81
Fuser KIT
Replace IU-81
Imaging unit
Replace OS-81
Oil supply roll
Replace Toner
TD-81C (Cyan)
Replace Toner
TD-81K (Black)
Replace Toner
TD-81M (Magenta)
Replace Toner
TD-81Y (Yellow)
Reset Fuser cln.
pad Press ENTER
Reset Trans.Roll
Press ENTER
Set paper
Press CONTINUE
Possible Cause
A font could not be read
due to insufficient memo-
ry.
A macro could not be
read due to insufficient
memory.
The fuser is worn out.
The imaging unit is worn
out.
The oil supply roller is
worn out.
The cyan toner developer
is empty.
The black toner developer
is empty.
The magenta toner
developer is empty.
The yellow toner develop-
er is empty.
The printer is waiting for
your input confirming that
you have replaced the
Cleaning Pad and reset-
ting its counter ( P. 45).
The printer is waiting for
your input confirming that
you have replaced the
transfer roller and reset-
ting its counter ( P. 45).
The multi-purpose tray is
empty.
Corrective Action
99: MPS: No job in the virtual
bin specified for output or that
page is missing.
A download font could not be
loaded into printer memory
due to insufficient available
printer memory. Either
remove unnecessary download
fonts or expand printer memo-
ry.
A download macro could not be
loaded into printer memory
due to insufficient available
printer memory. Either remove
unnecessary download macro
or expand printer memory.
Replace the fuser kit now.
Replace the imaging unit now.
Replace the oil supply roller
now.
Replace the cyan toner devel-
oper now.
Replace the black toner
developer now.
Replace the magenta toner
developer now
Replace the yellow toner
developer now.
Press ENTER and the printer
resets the transfer unit
counter to 0000000.
If you have not replaced the
Cleaning Pad, press EXIT, to
prevent the counter from being
reset.
Press ENTER and the printer
resets the transfer unit
counter to 0000000.
If you have not replaced the
transfer roller, press EXIT, to
prevent the counter from being
reset.
Add a sheet of paper to the
multi-purpose tray, and press
CONTINUE key.