Selecting The Output Stack - Kyocera FS C8026N Operation Manual

4 4 4 4
Press the or
Type Adjust appears.
>Reset Type
Adjust
5 5 5 5
To reset all custom paper types, press the ENTER
key. A question mark (?) appears.
>Reset Type
Adjust ?
6 6 6 6
Press the ENTER key. All customized paper types,
including weight and duplex printing capability, will
be reset to the default. The display returns to Ready.
key repeatedly until >Reset

3.10.11 Selecting the Output Stack

The Stack Select menu on the operator panel allows you to
select either the top (face-down) tray or the face-up tray for
the output stack. If the optional document finishe is installed,
it can also be selected as an output stack.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the or
Handling > appears.
Paper Handling >
3 3 3 3
Press the key.
4 4 4 4
Press the or
Select appears.
>Stack Select
Top tray F-down
5 5 5 5
To change the output stack, press the ENTER key. A
blinking question mark (?) appears.
>Stack Select
? Top tray F-down
6 6 6 6
Press the or
output stacks:
Top tray F-down
The output stacks change to include the following
when an optional document finisher (DF-600/610) is
installed:
Left tray F-up
Tray # F-up
Tray # F-down
7 7 7 7
When the desired output stack is displayed, press the
ENTER key.
8 8 8 8
To exit the menu selection, press the MENU key.
3-55
3.10 Paper Handling
key repeatedly until Paper
key repeatedly until >Stack
key to toggle through the following