Kyocera FS C8026N Operation Manual page 143

A.3 General Description of Options
A.3.3 PT-640 Fece-Up Tray
Attach the optional Face-Up Tray to the left side of the
printer as shown in the illustration. Use of the Face-Up Tray
help to avoid stress to the printer and print media when
printing on envelopes, postcards, OHP transparencies, etc.
The Face-Up Tray can hold up to 150 sheets.
To secure the two tray brackets to the side of the printer,
attach the tray to the brackets using the screws supplied with
the Face-up tray.
Figure A-10
Figure A-11
A.3.4 DU-640 Duplex Unit
The optional Duplex Unit supports the following paper types
for duplex printing: ISO A3, ISO A4, ISO A5, JIS B4, JIS
B5, Leger, Letter, and Legal. The Duplex Unit is installed
under the printer, as shown in the illustration below. See the
documentation that comes with the Duplex Unit for details
about how to install it.
For detailed information on installing the duplex unit, see the
manual supplied with the duplex unit.
Figure A-12
A.3.5 DF-600/610 Document Finishers
The Document Finisher makes it possible to staple pages as
they are output, and to stagger printed pages according to
print job. An optional punch unit, Booklet Folder Unit, and
multi-job trays are also available for configure this multi-
function device to meet specific needs.
The Document Finisher attaches to the left side of the printer
as shown in the illustration. Use the special bracket that
comes with the Document Finisher to attach it to the printer.
Figure A-13
A-6