Entering A Channel Name - Icom IC-M323 Instruction Manual

■ Entering a Channel name

Enter a name of up to 10 characters.
Capital letters, 0 to 9, some symbols (! " # $ % & ' ( ) * + , – . /
[ \ ] ^ _ : ; < = > ?) and a space can be entered.
Push [ ∫]/[√] to select a channel.
q
• First, cancel the Dualwatch, Tri-watch or Scan function, if acti-
vated.
Push [NAME] to open the channel name enter screen.
w
• A cursor is displayed on the first character.
Enter the desired channel name in the following manner:
e
• Select a desired character using Dial, or [∫]/[√]/[Ω]/[≈].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT] or Dial.
• Push [123], [!$?], or [ABC] to select a character group.
• Select "SPACE," then push [ENT] to enter a space.
• Select "DELETE," then push [ENT] to delete a character.
• Push [CLEAR] to cancel and return to the previous screen.
Repeat step e to enter all characters.
r
Push [ Ω]/[≈]/[∫]/[√] to select "FINISH," then push [ENT] to
t
set the name and return to the previous screen.
BASIC OPERATION
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
13