Dualwatch/Tri-Watch; Description; Operation - Icom IC-M323 Instruction Manual

6

DUALWATCH/TRI-WATCH

Description

■
Dualwatch monitors Channel 16 while you are receiving
on another channel; Tri-watch monitors Channel 16 and the
Call channel while receiving another channel. Dualwatch and
Tri-watch are convenient for monitoring Channel 16 when you
are operating on another channel.
DUALWATCH/TRI-WATCH SIMULATION
Ch 16 Ch 88
Dualwatch
• If a signal is received on Channel 16, Dualwatch and Tri-
watch pause on Channel 16 until the signal disappears.
• If a signal is received on the Call channel during Tri-
watch, Tri-watch becomes Dualwatch until the signal dis-
appears.
• To transmit on the selected channel during a Dualwatch
or Tri-watch, hold down [PTT].
18
Call channel
Ch 88 Ch 16 Ch 88 Ch 75
Tri-watch

Operation

■
Select Dualwatch or Tri-watch in the Menu screen. (p. 70)
q
Y]/[Z] to select the desired operating channel.
Push [
w
Push [DW] to start a Dualwatch or Tri-watch scan.
e
• "DUAL 16" is displayed during Dualwatch; "TRI 16" is displayed
during Tri-watch.
• A beep tone sounds when a signal is received on Channel 16.
To cancel Dualwatch or Tri-watch, push [DW] again.
r
[Example]: Operating Tri-watch on INT Channel 25.
Tri-watch starts.
Tri-watch resumes after the
signal disappears.
Signal is received on
Call channel.
Signal received on Channel
16 takes priority.