Icom IC-M323 Instruction Manual page 49

D Making a Polling Request Call
(For only U.S.A. and Australian version transceivers)
Make a Polling Request Call when you want to know a spe-
cific vessel is in the communication area, or not.
Enter "POLLING REQUEST" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU].) (Rotate Dial, then push [ENT].)
Select a desired preset individual address, or "Manual In-
w
put," using Dial or [Y]/[Z], then push Dial or [ENT].
• The ID code for the Individual call can be entered first. (p. 20)
• When "Manual Input" is selected, enter a desired 9 digit MMSI ID
code for the individual you wish to call.
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
➪ Polling Request
About Manual Entry:
Enter a desired individual ID in the following way:
• Select a desired number using Dial, or [Y]/[Z]/[Ω]/[≈].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT] or Dial.
• The first digit is specified as '0' for a Group ID. If a Group ID is
entered, an error beep sounds after pushing [FINISH].
• The first two digits are '0' for any coast station ID.
A confirmation screen is displayed.
e
• Confirm the call contents.
7
DSC OPERATION
+ Continued on the next page.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
39