Adjusting The Volume And Squelch Levels; Selecting A Weather Channel - Icom IC-M323 Instruction Manual

D Selecting a Weather channel
(For Only U.S.A. and Australian version transceivers)
The transceiver has 10 weather channels. These are used for
monitoring broadcasts from NOAA. (National Oceanographic
and Atmospheric Administration)
The transceiver can automatically detect a weather alert tone
on the selected weather channel, or while scanning. (p. 16)
Push [CH/WX] once or twice to select a weather channel.
q
• "WX" is displayed when a weather channel is selected.
• "WX " is displayed when the Weather Alert function is ON. (p.
71)
Push [ ∫]/[√] to select a channel.
w
• Pushing [Y]/[Z] on the microphone also select a channel.
When weather alert is OFF.
When weather alert is ON.
Adjusting the
■
squelch levels
The volume and squelch levels can be adjusted with [VOL/
SQL](Dial).
Push [VOL/SQL](Dial) one or more times to display the
q
volume or squelch adjustment screen.
Rotate [VOL/SQL](Dial) or push [∫]/[√]/[Ω]/[≈] to adjust
w
the volume or squelch level.
• The transceiver has 20 volume levels and OFF.
• The transceiver has 11 squelch levels. OPEN is completely
open, 10 is tight squelch, 1 is loose squelch.
• If no key is push for about 5 seconds, the transceiver sets the
selected volume level, and returns to the normal mode.
Push [ENT] to set the level, and exit the volume adjust-
e
ment mode.
• Push [CLEAR] to cancel.
The desired function can be assigned to Dial. See page 72
for details.
BASIC OPERATION
volume and
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
11