8. Specifying the Extended Security Functions
Menu
System
Settings
Scanner
Features
• The SNMP setting can be specified in [SNMP] under [Configuration] in Web Image Monitor.
Settings You Can Configure Using Web Image Monitor
Use Web Image Monitor to configure the security settings shown in the following table.
8
Category
Device Settings/
Logs
Device Settings/
Logs
Security/User
Lockout Policy
Security/User
Lockout Policy
Security/User
Lockout Policy
Security/User
Lockout Policy
204
Tab
Administrator
Machine Data
Tools
Encryption Settings
Initial Settings
Menu Protect
Item
Collect Job Logs
Collect Access Logs
Lockout
Number of Attempts before
Lockout
Lockout Release Timer
Lock Out User for
Item
Select [Encrypt], and then select [All Data]
for "Carry over all data or file system data
only (without formatting), or format all
data"
If [Encrypt] is already selected, further
encryption settings are not necessary.
See p.100 "Encrypting Data on the Hard
Disk".
Level 2
See p.118 "Menu Protect".
Active
Active
Active
5 times or less.
See p.68 "User Lockout Function".
Set to Active or Inactive. When setting to Active, set
the Lockout release timer to 60 minutes or more.
See p.68 "User Lockout Function".
When setting "Lockout Release Timer" to[ Active],
set the Lockout release timer to 60 minutes or more.
See p.68 "User Lockout Function".
Setting
Setting