Encryption Key Manual Settings Configuration Flow
This can be specified by the network administrator.
• Before transmission, SA information is shared and specified by the sender and receiver. To prevent
SA information leakage, we recommend that this exchange is not performed over the network.
• After configuring IPsec, you can use "Ping" command to check if the connection is established correctly.
However, you cannot use "Ping" command when ICMP is excluded from IPsec transmission. Also,
because the response is slow during initial key exchange, it may take some time to confirm that
transmission has been established.
Specifying Encryption Key Manual Settings
1.
Open a Web browser.
2.
Enter "http://(the machine's IP address or host name)/" in the address bar.
3.
Click [Login].
The network administrator can log in.
Enter the login user name and login password.
4.
Click [Configuration], and then click [IPsec] under "Security".
5.
Select [Active] for "Encryption Key Manual Settings".
6.
Click [Edit] under "Encryption Key Manual Settings".
Transmission Using IPsec
BZM008
7
181