Advanced Page - Kyocera FS-1118MFP Advanced Operation Manual

Using COMMAND CENTER

Advanced Page

Item
Host Name
IP Address
Subnet Mask
Default Gateway
DHCP/BOOTP,
RARP
ARP/PING
DNS Server (Primary,
Secondary)
Domain Name
WINS Server (Primary,
Secondary)
Scope ID
FTP Status Check
8-18
This section includes advanced settings that apply to the machine and is comprised
primarily of advanced network settings. Pages in this section are available only to the
Administrator (if the Admin password has been set).
NOTE:
Always restart this machine after you have completed these settings in
order to properly register the content of those settings in the machine. Refer to
Basic > Reset on page 8-9.
Advanced > Protocols > TCP/IP > General
The table below provides a summary of the items displayed on the Printer System
page.
Description
Specifies a name for the printing system network component. This name is also
used as the NetBEUI Printer Name and the SNMP sysName object.
Assigns the Internet Protocol address on the printing system network
component. Format of the IP Address is four-byte (32-bit) numbers separated by
dots, e.g. 192.168.110.171.
Specifies the subnet mask configured on the printing system network component.
If the printing system does not automatically assign a usable default value and
the first number in the IP address above is from 192 to 254, then use
255.255.255.0 as the subnet mask.
The IP address of the gateway router for the local network.
Identifies how the machine obtains its IP configuration: DHCP/BOOTP: automatic
configuration via a BOOTP server or a DHCP server.
Automatic configuration using the Reverse Address Resolution Protocol.
Automatic configuration using the Address Resolution Protocol and PING to
identify whether an IP Address is live.
The IP address of the primary and secondary Domain Name System (DNS)
servers.
The Domain Name System (DNS) name of the domain which the printing system
belongs, such as kyoceramita.com. It should not include the host printer name.
The IP address of the primary and secondary Windows Internet Name Service
(WINS) servers.
This section determines the scope of IP addresses that a Windows server can
grant or lease to any requesting network component. A DHCP server processes
the printing system's discovery broadcasts and returns an IP address to it. The
DHCP server may be set up to grant an IP address for a limited time (a
temporary lease) or for an unlimited time (an unlimited lease), or it may be
configured with a permanent address reservation for the printing system.
Enables or disables the FTP Status Check.
ADVANCED OPERATION GUIDE