Kyocera FS-1118MFP Advanced Operation Manual page 107

Kyocera all in one printer user manual
Hide thumbs Also See for FS-1118MFP:
Table of Contents

Advertisement

Item
IPP
IPP Port Number
Item
AppleTalk
Printer Name
Zone Name
Item
NetBEUI Protocol
Browse Master
Printer Name
Workgroup
Comment
ADVANCED OPERATION GUIDE
Advanced > Protocols > IPP
Using IPP (Internet Printing Protocol), you can output to the printer over the Internet
or an intranet.
Description
Enables or disable IPP (Internet Printing Protocol).
Sets the IPP Port Number. Be sure to set the default port number to either 80 or
631.
Advanced > Protocols > AppleTalk
The printing system network component supports Mac OS of various versions (refer
to System Requirements on page 8-1.) and is compatible with LaserWriter driver
version 8.x.
To set up the Ethernet interface to communicate via AppleTalk, enables AppleTalk
protocol operation on the printing system.
Description
Enables or disables AppleTalk protocol.
Specifies the name of the printing system in the AppleTalk network.
Specifies the name of the AppleTalk zone (network). An asterisk (*) means the
default zone.
Advanced > Protocols > NetBEUI
Peer-to-peer printing is available using NetBEUI protocol. With this method, the
printing system is conveniently located in Windows Network Neighborhood.
Description
Enables or disables NetBEUI protocol.
With this option set to On, the printing system becomes the browse master and
creates a workgroup in Windows Network Neighborhood. With this option set to
Off, the printing system can only join an existing workgroup. Note that with
Browse Master disabled, the printing system will only appear on the network if at
least one machine in its workgroup is turned on and can perform the browse
master function.
Printer Name correlates with Host Name in the TCP/IP General tab (Advanced >
Protocols > TCP/IP > General). If you want to change the NetBEUI printer name,
change the TCP/IP Host Name.
Workgroup represents the workgroup which will appear in Entire Network in
Windows Network Neighborhood.
You can enter comments here. (This can also be left blank.)
Using COMMAND CENTER
8-21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-1820

Table of Contents