Kyocera FS-1118MFP Advanced Operation Manual page 65

System Menu/
Counter
or
Common Setting
Enter
or
Orig./Paper Set
Enter
or
Custom PaperSize
Enter
ADVANCED OPERATION GUIDE
Registering Custom Paper Size
If you normally copy or print onto a paper size that is not registered in this machine
(non-standard size), it is convenient to register that size in advance. It is possible to
register a custom paper size within the following ranges:
Measurement
Inch specifications
Metric specifications
1
Access Custom PaperSize.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2
Press or
displayed.
3
Use the numeric keys to enter the Y dimension (height) of the print paper to be
registered.
Once the height is displayed, press Enter. The Size Entry(X) screen is
displayed.
4
Use the numeric keys to enter the X dimension (width) of the print paper to be
registered.
Once the width is displayed, press Enter. The display shows Registered and
returns to the Orig./Paper Set screen.
X Range
3.15 to 8.50 inches
80 to 216 mm
to select Custom and press Enter. The Size Entry(Y) screen is
System Settings
Y Range
5.83 to 14.02 inches
148 to 356 mm
5-17