Kyocera FS-1118MFP Advanced Operation Manual page 101

Item
FAX Receive
DRD Pattern
Receive Date/Time
2in1 Receive
Receive Bulk Print
Remove Switching
Dial Number
Encryption Key No.
Number of Rings
(Normal)
Number of Rings
(TAD)
Number of Rings
(FAX/TEL)
ADVANCED OPERATION GUIDE
FAX > Receive > General
The table below provides a summary of the items displayed on the FAX reception
general page.
Description
Selects the FAX reception mode. The selectable option is different depending on
the destination. The choices are Auto (Normal, FAX/TEL, TAD or DRD) or
Manual.
Selects the DRD pattern. This menu is available only for certain destination.
Selects On or Off whether to print the reception information such as the received
date, the received time, the transmitting party's information and the number of
transmitted pages on the top of the received documents.
Enables or disables 2in1 reception.
Enables or disables FAX bulk reception. When enabled, the FAX system prints
the received documents after its reception completes. It will be possible to make
copies during that reception.
Specifies the remote switching dial number. Remote switching allows you to
initiate fax reception from a telephone connected to the FAX system.
Selects the encryption key number to use in the encrypted communication.
Specifies the number of rings for Auto FAX reception (Normal).
Specifies the number of rings for Auto FAX reception (TAD).
Specifies the number of rings for Auto FAX reception (FAX/TEL).
Using COMMAND CENTER
8-15