Copying Both Sides Of A Card On A Sheet - Toshiba E-studio18 User Manual

Multifunctional digital systems all in one printer toshiba e-studio18
Hide thumbs Also See for E-studio18:
Table of Contents

Advertisement

2.COPY FUNCTIONS
Place the next original face down on the original glass.
14
1) Open the platen cover.
2) Place the original face down on the original glass.
3) Align the original against the left rear corner of the original glass in the same way as the first one.
Be sure to place the original in the same orientation as the one selected at step 8.
15
Make sure that "YES" is selected.
If necessary, press the
Press the [SETTING/OK] or [START] button.
16
The equipment starts scanning the original. Wait until the LCD screen shows "NEXT ORIGINAL?".
17
Repeat the previous steps 14 to 16 until you finish scanning the last original to copy.
When you are finished with the last original, go to the next step.
Up to 120 original sheets can be scanned at one time. When the number of sheets to be scanned exceeds 120
or the built-in memory in the equipment becomes full during the scanning of the copy job, scanning stops and
"MEMORY IS FULL PRESS ANY KEY" appears on the LCD screen. Press any button on the control panel. The
scanned pages are cancelled.
18
Press the
Press the [SETTING/OK] or [START] button.
19
The equipment automatically starts printing two or four original pages on each sheet of paper. The copied pages
are reduced to fit on each sheet.

Copying both sides of a card on a sheet

You can set "ID CARD" to copy the front and back of a card on a sheet of paper.
The maximum card size is 74 mm x 106 mm (2.9" x 4.2"). For the "ID CARD" function, be sure to use paper larger
than 126 mm x 178 mm (5" x 7").
You cannot make use of this function together with certain other ones.
P.165 "Copying Function Combination Matrix"
You can access this function quickly with the
-
For the regions other than Europe:
P.63 "Using the "ID CARD" or "DENSITY" function quickly"
-
For Europe, if you have not changed the default:
P.65 "Using the "F1" or "F2" function quickly"
Press the [MENU] button to enter the "MENU" mode.
1
or
to select "YES" and continue the operation.
or
button to select "NO" on the "NEXT ORIGINAL?" menu.
Front side
Back side
button. The button operation varies from region to region.
2 COPY FUNCTIONS
Advanced Copy Functions
75

Advertisement

Table of Contents
loading

Table of Contents