2.COPY FUNCTIONS
Copying both sides of a card on a sheet
You can copy the front and back of a card on a sheet of paper.
Front side
You can directly enable this function by pressing . The button operation varies depending on the region.
For regions other than Europe and the Americas:
P.37 "Using the "EXPOSURE" or "ID CARD" function quickly"
Be sure to set the paper size and density, etc. before selecting [ID CARD].
The settings for the area to scan originals and the print position vary from region to region, so that the area wider
than the card frame of the original glass might be scanned depending on the region.
The upper and left areas (about 4 mm in width) cannot be copied. To copy up to the edges of a card, place the card
apart from the edges of the original glass.
Menu Functions
ID CARD
1
Press [COPY].
Press
or
to select the item displayed on the LCD screen, and then press .
2
Press
or
to select the setting item, and then press [OK].
3
52 Copy Settings
Back side
READY
1
100%
2IN1/4IN1:OFF
ID CARD:OFF
Settings
OFF
ON
A4