Table of Contents
Advertisement
3.PRINT FUNCTIONS
Status Icon
Paper Jam in Printer
Paper Ejection Jam
Paper Size Error
Front Cover Open
Side Cover Open
Toner Low (Black)
Black Toner Empty
Toner Not Recognized
Paper Empty in Drawer
Standard Output Tray Paper Full
Main Motor Error
Polygonal Motor Error
Fuser Error
Fatal Error
Paper Type Error
Memory full
Paper Empty in Bypass tray
The front-sided printing has been accomplished.
*
This message appears when you use the manual 2-sided printing feature.
Printer Status
*
Error Recovery
Please Open Cover And Remove Paper.
Please Open Cover And Remove Paper.
Please Set Correct Size Or Cancel Job.
Please Close Cover.
Please Close Cover.
-
Please Refill Black Toner.
Please Check Toner.
Please Add Paper.
Please Remove Paper.
Please Contact Service Technician.
Please Contact Service Technician.
Please Contact Service Technician.
Please Contact Service Technician.
Please Press Start Key Or Cancel Job.
Please Press Any Key.
Please Add Paper.
Turn the paper over to print on the back side and put it on the
bypass tray. Then, press start.
3 PRINT FUNCTIONS
Status Monitor
89
Advertisement
Table of Contents
