Table of Contents
Advertisement
General Precautions
When installing or moving
Warning
For the U.S.A. and Canada
This equipment requires 120 V 7.8 A, 60 Hz electric power.
For the EU
This equipment requires 220 to 240 V AC, 3.7 A 50-60 Hz electric power.
Except the U.S.A., Canada and the EU
This equipment requires 220 to 240 V AC, 3.7 A 50-60 Hz electric power. For Saudi Arabia 100 V version, it requires 127
V AC, 7.8 A 50-60 Hz electric power.
Do not use a power supply with a voltage other than that specified.
Avoid multiple connections in the same outlet. This could cause a fire or give you an electric shock. If you are
considering increasing the number of outlets, contact an electrician.
Always connect this equipment to an outlet with a ground connection to avoid the danger of fire or electric shock in
case of short-circuiting. Contact your service representative for the details. Be sure to use a 3-conductor, grounded
wall outlet.
In areas, where a 2-pin plug is used, the equipment must be grounded for safety. Never ground it to a gas pipe, a water
pipe, or any other object not suitable for grounding.
Plug the power cable securely into the outlet. If it is not plugged in properly, it could heat up and cause a fire or give
you an electric shock.
Do not damage, break or attempt to repair the power cable.
The following things should not be done to the power cable.
- Twisting it
- Bending it
- Pulling it
- Placing anything on it
- Making it hot
- Situating it near radiators or other heat sources
This could cause a fire or give you an electric shock. If the power cable is damaged, contact your service
representative.
Do not install the equipment by yourself or try to move it once it has been installed. This could result in an injury or
damage to the device. Contact your service representative if the equipment needs to be installed or moved.
Pull the plug out from the outlet more than once a year to clean around the prongs. Accumulating dust and dirt could
cause a fire due to the heat released by electric leakage.
Caution
Avoid placing the equipment in a place unsuitable for its weight and also make sure the surface is level.
Remember that if the equipment falls over, serious injuries could result.
Weight of the equipment: approx. 30 kg (66.1 lb.) (for the EU and China), approx. 29 kg (63.9 lb.) (for North America
and Other)
Be sure to use the adjusters (safety stopper) to fix the equipment firmly to the floor after moving/installing it. Make
certain that the equipment is steady. If it moves, it could fall over and injure someone.
When removing the plug from the outlet, do not pull the power cable. Always hold the plug when removing it from the
outlet. If the power cable is pulled, the wires may become broken and this could cause a fire or give you an electric
shock.
Make sure that the ventilation holes are not blocked up.
If the temperature within the equipment becomes too high, a fire could result.
When connecting the interface cable to the equipment, be sure to turn the power OFF. If the power is not turned off,
you could get an electric shock.
General Precautions
15
Advertisement
Table of Contents
