6.
Pull the system board away from and out of the computer (3), making sure the connectors on the side
of the board are clear of the computer.
Reverse this procedure to install the system board.
Power button
Description
Power button
Before removing the power button, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
6.
Remove the system board (see
Remove the power button:
1.
Remove the two Phillips PM2.0×2.4 screws (1) that secure the button to the computer.
62
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page
56).
System board on page
32).
60).
Spare part number
not spared