Table of Contents
Advertisement
NFC module
Description
NFC (Near Field Communication) module
NFC cable kit (includes NFC cable and antenna)
Before removing the NFC module, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
Remove the NFC module:
1.
Disconnect the cable from the NFC module (1).
2.
Disconnect the antenna from the NFC module (2).
3.
Use a flat tool to pry the module up (3), and the lift it from the computer (4).
NOTE:
804213-001.
Reverse the removal procedures to install the NFC module.
58
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page
The NFC module cable and NFC antenna are available in the NFC Cable Kit, spare part number
32).
56).
Spare part number
790069-001
804213-001
Hide quick links:
Advertisement
Table of Contents
