Table of Contents
Advertisement
5.
Disconnect the battery cable.
Remove the display assembly components:
1.
Position the computer upright, and open as far as possible.
2.
To remove the display bezel:
a.
Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of
the display bezel until the bezel disengages from the display enclosure.
b.
Remove the bezel.
The display bezel is available using spare part number 790046-001.
3.
If it is necessary to replace the webcam/microphone module:
a.
Detach the webcam/microphone module (1) from the display enclosure. (The webcam/
microphone module is attached to the display enclosure with adhesive.)
Component replacement procedures
35
Hide quick links:
Advertisement
Table of Contents
