Table of Contents
Advertisement
SSD drive
Description
Solid-state drive
512-GB
256-GB, SED, OPAL2
256-GB, TLC
256-GB
180-GB
180-GB, SED, OPAL2
128-GB, TLC
128-GB
Before removing the solid-state drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery cable.
Remove the SSD:
1.
Remove the Phillips PM2.0×1.8 screw (1) that secures the drive to the system board.
Bottom cover on page
32).
Spare part number
790057-001
790056-001
804216-001
790055-001
790052-001
790053-001
804215-001
790051-001
Component replacement procedures
41
Hide quick links:
Advertisement
Table of Contents
