e.
Lift the display hinges off the display enclosure (3).
Display hinges are available in the Display Hinge Kit, spare part number 801211-001.
11.
To remove the display bezel:
a.
Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of
the display bezel until the bezel disengages from the display enclosure.
b.
Remove the bezel.
The display bezel is available using spare part number 790046-001.
12.
If it is necessary to replace the webcam/microphone module:
a.
Detach the webcam/microphone module (1) from the display enclosure. (The webcam/
microphone module is attached to the display enclosure with adhesive.)
48
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts