Power Off - Fly Sky FS-i10 Instruction Manual

15.
Power On
1. Connnect all parts,
2. Press the two power buttons to power on the unit. Switch
on the transmitter,
3. Connect the receiver battery,
4. The receiver red LED indicator is solid indicating the
presence of a correct signal,
5. When the error rate of transmitter is less than 5%, the
signal of receiver is stable,
6. Use the radio system.
15.01
Boot Abnormal Protection
If the screen looks like picture 15.1.1, there is a system problem. You must resolve the problem before
restarting the system
1. The switch is not reset. (You need to push switch up.)
2. Thro Stick (Push to lowest setting)
16.

Power off

1. Cut off power source of receiver,
2. Press the two power buttons to power off the unit. Switch
off the transmitter.
Attention: transmitter cannot be turned off if the power
source of receiver is not cut off.
(Pic 16.1)
16.01 Shutdown Abnormal Protection
If the screen looks like picture 16.1.1 you need to turn off the receiver first and then turn off the transmitter
22
Power on
(pic 15.1)
Power off
(Pic 15.2)
(Pic 16.2)
http://www.flysky-cn.com
(pic 15.1.1)
(Pic 16.1.1)