System Overview - Fly Sky FS-i10 Instruction Manual

Digital proportional radio control system
Hide thumbs Also See for FS-i10:
Table of Contents

Advertisement

Digital proportional radio control system
8.

System Overview

The transmitter i10:
· Adopts the latest two-way communication systems to ensure that all of the FS-brand receivers are compatible with this transmitter
· Home page menu can monitor i10 voltage, speed, temperature, voltage parameters, function conditions (on/off), model structure
and timers in real time.
· The flashing LED and 3D audio effect will alert the user when a system exception occurs.
· This parameter is easily set due to the 3.55 inch, 240 by 400 pixels (WQVGA) color TFT-LCD touch screen.
· The power switch design prevents accidental power off or power on conditions. The transmitter can only be turned on/off by
pushing both the left and right power buttons at the same time.
· Eight switches and five knobs can be assigned to different functions in most applications. The three knobs can be hidden by
pressing them.
· The high-precision double-bearing gimbal and fashionable ultra-thin transmitter ensure a great experience for the user.
· The double antenna structure ensures the 2.4G frequency module transmits in all directions for a safer and better signal.
· The transmitter can store 20 models, including every model binding conditions. It can also store model settings on a SD card.
· Free software and upgrades to the system are available online.
·It is compatible with helicopter fixed-wing, glider, and powered glider. Airplane has two type, fixed-wing and helicopter.
Different airplane structure is matching with different procedure. Users can set according to airplane structure.
· (General functions)
Reverse 、End points、Subtrim 、Trims 、Exponentials 、
Aileron to rudder 、Rudder to aileron 、Throttle curve 、Throttle delay 、
Throttle down 、Auxiliary channels 、Channels offset 、Function delay 、
Channels delay 、Linear mixes 、Curve mixes 、Conditions 、
Logic switches 、Airplane structure 、Timers 、Trainer mode 、
Display servos 、Models 、RX setup 、System
· (Airplane/Glider)
Default structure (Engine+Aileron+Elevator+Rudder)
Exclusive function menu:
Aileron function 、Flap function 、Spoiler function 、Elevator to flap 、
hrottle needle 、Butterfly 、Elevator function 、Rudder function 、
V tail
· (Helicopter)
Default structure (fixed pitch)
Exclusive function menu:
Throttle hold 、Throttle mix 、Pitch curve 、Swashplate mix 、
Swashplate type 、Swashplate ring 、Governor 、Gyroscope
9

Advertisement

Table of Contents
loading

Table of Contents