Magnetic Stripe Reader (Msr); Attaching And Removing; Using The Msr - Symbol MC50 User Manual

2-18 MC50 Integrator Guide

Magnetic Stripe Reader (MSR)

This section describes how to set up and use the snap-on MSR with the mobile computer. The MSR snaps on to the bottom of the
mobile computer and can be easily removed when not in use.
When attached to the mobile computer, the MSR allows the mobile computer to capture data from magnetic stripe cards. To download
MSR data capture software, visit http://devzone.symbol.com.

Attaching and Removing

To attach, slide the MSR onto the bottom of the mobile computer and secure by snapping the arms into the mobile computer housing.
Card Reader Slot
To remove the MSR open the arms and pull the MSR from the mobile computer.

Using the MSR

The MSR3000 sample application illustrates how an application should handle MSR inputs (refer to Symbol Applications User's
Guide).
To use the MSR:
1. Attach the MSR to the mobile computer.
2. Power on the mobile computer.
3. Tap Start - MC50 Demo - Test Apps - MSR MC50 or MSR Cameo to start the sample application.
Figure 2-15. MSR Installation
Arms