Magnetic Stripe Reader - Symbol MC9090G User Manual

The battery usually charges in less than four hours.
Spare Battery LED Charging Indicators
Table 6-2
LED
Off
Fast Blinking Amber
Slow Blinking Amber
Solid Amber

Magnetic Stripe Reader

This section describes how to set up and use the snap-on MSR with the mobile computer. The MSR snaps on to
the bottom of the mobile computer and can be easily removed when not in use.
Card Reader Slot
Communications Port
Magnetic Stripe Reader
Figure 6-9
CAUTION
When attached to the mobile computer, the MSR has the following attributes:
•
Provides power for operating the mobile computer, with the appropriate power connection.
•
Allows the mobile computer to capture data from magnetic stripe cards. (To download MSR data capture
software, visit: http://devzone.symbol.com.)
No spare battery in slot; spare battery not placed correctly; cradle is not powered.
Error in charging; check placement of spare battery.
Spare battery is charging.
Charging complete.
Latches
Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an alternative
power supply will void the product warranty and may cause product damage. See
for the power supply regulatory compliance statement.
Indication
Pogo Pin Pass-through
Connector
Latch Grip
Power Port
Accessories 6 - 11
Appendix C, Regulatory