Start up screen
When user interface startup it will show
loading screen as shown below.
After a few seconds this scree will
change into Data reading in progress
screen. Shown below.
After loading the aplication the user
interface will be show main menu
screen.
trainer is now ready to start your workout
programming of just select quick start
and begin.
8
O w n e r ' s m a n u a l
Programs
Quick start
•
Turn the jogwheel and select
"Quick start"
•
Press the jogwheel to confirm and
enter the workout screen quickly
Workout screen
The X axis denote time in minutes
betwen 0~30. It is updated once every
15 minnutes during workout
•
During workout, press the jogwheel
button to switch the Y-axis between
Nm↔ bpm.
•
Turning jogwheel during workout will
increase/ decrease the resistance level
in NM
•
The bar chart denotes torque value Nm.
Rotate the jogwheel to adjust the Nm
value.
•
The white dot line shows current
position, which moves rightward as
workout time increases. The workout
screen could show 5-hour data at most.
•
The orange curve shows the user's
actual heart rate, which varies as the
heart rate frequency goes up and down.
GB
•
F 3 0