Tunturi Platinum PRO User Manual page 17

• Press the jogwheel button to confirm
and to open information window
Information window
• Press the jogwheel button to confirm
and to open Workout screen.
Workout screen
• The X-axis unit is min
• The Y-axis unit is bpm
• The bar chart denotes the Watt value
of the Profile.
• The white dot line shows current
position, which moves rightward as
time increases, the workout time is 5-
hour at most then the workout screen
leaves
• The orange curve shows the user's
actual heart rate, which varies as the
heart rate frequency goes up and
down
• The horizontal red dot line shows the
user's target hear rate value
The screen shows
"Test Failed ! if:
• the workout time is too short
• RPM value is too low
• HR target is not reached
• HR is less than 110bpm
16
"No Heart Rate detected"if:
• It doesn't detect the user's heart rate
Press Back/stop or Main menu button to
leave the workout screen
"Target HR reached! Stop test or
Continue"
• User has achieves the target.
• press the jogwheel button to end the
test and show workout data screen
Workout data screen
• Press jogwheel to go to VO2 Max
test result screen
VO2 Max test result screen
• Press jogwheel to go back to main
menu
To stop your workout see:
"End your workout"