Assembly; Step 1 - Tunturi Platinum PRO User Manual

Assembly

Rear support tube,
rear handlebars and
meshback assembly
1. Install the Rear Support Tube (7)
onto the Main Frame with four 3/8" x
2-1/4" Hex Head bolts (65) and four
3/8" x25 Flat Washers (84).
4

Step 1:

2. Install the Seat Handlebars (6) onto
the Seat Carriage (4) with four 3/8"
x 2" Hex Head bolts (74), four 3/8"
x 3" Hex Head bolts (183), eight
3/8"x19mm flat washers (77) and
eight 3/8" Nyloc nuts (89).
3. Install Seat Back Frame (5) onto the
Seat Carriage (4) with the 2pcs of
M10×100 Hex Head Bolts (67) and
2pcs of Ø10×Ø14×3T Nylon Washers
(184) and 2pcs of M10×8T_Nyloc Nut
(192) by using the 17m/m_Wrench
(190) . Tighten the bolts snugly
enough so the seat back has no play
but does not bind when reclining.