Table of Contents
Advertisement
Connecting
YourTV
3 5
_mnecting
remote IR device
Connecting r emoteIR devices
Using the IR blaster OUTterminal
You can use the TV's IR OUT terminal to remotely operate many infrared
remote-controlled
devices enclosed in an entertainment center or similar
cabinet.
Items needed:
o*.o Dual-wand IR blaster cable (see "Dual-wand IR blaster cable" on
page 29)
o:* Other cables as required to connect the device(s) to the TV (see
"Overview of cable types" on page 28)
See the remote IR blaster setup section (see page 65).
To connect the IR blaster cable:
1
Locate the infrared sensor on the front of your device. This sensor
is marked on some devices. If you are having issues locating the
device's infrared sensor, see "If you cannot locate the device's
infrared sensor:" on page 37.
2
Align one of the IR blaster cable's wands approximately 1 inch
away from the infrared sensor on the front of the device and attach
it using double-sided mounting tape. If you have a second device,
attach the second wand in a similar manner.
NOlr£
If youdo not havea second device,coilthesecondwandwith a rubber
bandandleaveit behindtheTV.
Advertisement
Table of Contents
