Adjusting The Audio; Mutingthe Sound; Selectingstereo/Sapbroadcasts - Toshiba 65L9400U User Manual

1 1 6 Picture and Sound Controls
Adjusting the audi
10P White Balance:
1 Press the MENU button.
2 Select Picture > Expert Picture Settings > White Balance >
Setting Type and press the OK button.
3 Press the A/Y (arrow) buttons to select 10P and press the OK
button.
4 Press the A/Y (arrow) buttons to select 10P White Balance and
press the OK button.
5 Press the A/Y (arrow) buttons to select IRE, Red, Green, or Blue.
6 Press the _ (arrow) button.
7 Press the 4/_" (arrow) buttons to adjust.
Adjusting the audio
Mutingthe sound
Press the MUTE button to partially reduce (1/2 Mute) or turn off (Mute)
the sound. Each time you press the MUTE button, the nmte mode
changes in the following order: 1/2 Mute, Mute, Volume, 1/2 Mute, etc.
NOTN
If youmodifyitemsin theSound menuwhileMuteis
active,
Muteis
cancelled.
Selecting stereo/SAP broadcasts
The MTS (nmtti-channet TV sound) feature is only available for analog
signals on the ANT/CABLE input. When the TV receives a stereo or SAP
(second audio program) broadcast, the icon STEREO or SAP appears on
screen when the INFO button is pressed.
To listen in stereo sound:
1 Press the MENU button.
2 Select Sound > MTS and press the OK button.
3 Press the A/V (arrow) buttons to select Stereo.
4 Press the EXIT button.
NOTN o:, Youcantypicallyleave theTVin Stereo modebecause it outputsthe
typeof soundbeingbroadcast (stereo or monaural).
¢ If thesoundis noisy,selectMono.
•_. If thereis no soundin SAPmode,selectStereo.